Draper 112041Q NTSC Projector Screen
112041Q NTSC Specifications:
| Viewable Area: |
42.5(w) x 56.5(h) inches |
| Screen Diagonal : |
71 inches |
| Screen Aspect Ratio: |
4:3 |
Additional Product Info:
Screen Surface: Glass Beaded CH3200E
 |
3.2 |
 |
60º |
|
|
Glass Beaded CH3200E is a textile backed screen surface, consisting of a reflective surface laminated to a woven textile base. The screen surface hangs suitably flat because of the stability of the material and the weight of the bottom dowel. Good for all types of projection.
The CH3200E material has spherical glass beads embedded in the surface to provide brighter on-axis viewing than matt white, but have a narrower viewing cone. Glass beaded surfaces perform best when the projector is mounted at the same leel as the screen. CH3200E is flame and mildew resistant; and is cleaned with only a dry brush or towel. Seamless in standard sizes through 10’ high.
Care and Maintenance: Clean surface with a very soft dry brush or cloth and carefully dust the surface. Do not use soap, water, solvents or abrasives.
|
|
|
|
|
|
Overview: 112041Q-NTSC
- Designed for recessed installation in conference and meeting rooms, executive facilities and training centers.
- Motor-in-roller with automatic ceiling closure that can easily be finished to match ceiling.
- The motor is mounted inside the roller on special vibration insulators.
- Easy installation above most ceilings.
- Operates smoothly and silently, even after years of service.
- With control options, this projection screen can be operated from any remote location.
- NTSC, HDTV and WideScreen format projection screens have black borders on all four sides.
- Depending on surface, available in sizes through 12' x 12' and 15' NTSC.
- Warranted for one year against defects in materials and workmanship
- Custom sizes available.
|
**Screen Ordering Notes:- Ships in 7-10 business days.
- Screens are only shipped in Contiguous US (48 states).
- Screen dimensions are based on manufacturers details and subject to change. Tolerances are typically ±1 inch.
|
