Draper 200156 NTSC Projector Screen
200156 NTSC Specifications:
Viewable Area: |
87(w) x 116(h) inches |
Screen Diagonal : |
145 inches |
Screen Aspect Ratio: |
4:3 |
Screen Surface: Grey XH600V
 |
.6 |
 |
60º |
|
|
Grey XH600V is made with 100% vinyl screen materials and is tensioned vinyl with no backing or the optional black backing. Draper offers this surface on motorized and permanently tensioned screens with built-in tensioning systems. The surface is stretched perfectly flat, resulting in better picture quality. Flatness is always desirable, particularly for video or data-graphics projection.
Grey XH600V is a grey front projection surface that provides excellent contrast and black reproduction, with a low gain to handle today's super-bright projectors. The grey color enhances color contrast, black levels and allows for more ambient light in the audience area. Available in sizes through 9' x 9', or 9' high in greater widths.
Care and Maintenance: Clean surface with a solution of mild dishwashing liquid diluted with warm water. Remove stubborn stains with a solution of rubbing alcohol and water. Do not allow any cleaners to be absorbed by the fabric. Do not use cleaners which contain abrasives or wax.
|
|
|
|
Overview: 200156-NTSC
- Draper's Tab-Tensioning system holds the surface taut and wrinkle-free.
- Delivers outstanding picture quality even with sophisticated data graphics projectors.
- Projected image is framed by standard black masking borders at sides.
- Meets the exacting requirements of large-screen video and data projection.
- Viewing surface is raised and lowered by turning a detachable, polished aluminum crank handle.
- 12" black drop is standard.
- Depending on surface, available in sizes through 12' x 12' and 15' NTSC.
- Black case with matching endcaps.
- Warranted for one year against defects in materials and workmanship.
- Custom sizes available.
|
**Screen Ordering Notes:- Ships in 7-10 business days.
- Screens are only shipped in Contiguous US (48 states).
- Screen dimensions are based on manufacturers details and subject to change. Tolerances are typically ±1 inch.
|