Draper 253101 AV Projector Screen
253101 AV Specifications:
Viewable Area: |
108(w) x 108(h) inches |
Screen Diagonal : |
153 inches |
Screen Aspect Ratio: |
1:1 |
Screen Surface: Grey XH600V
 |
.6 |
 |
60º |
|
|
Grey XH600V is made with 100% vinyl screen materials and is tensioned vinyl with no backing or the optional black backing. Draper offers this surface on motorized and permanently tensioned screens with built-in tensioning systems. The surface is stretched perfectly flat, resulting in better picture quality. Flatness is always desirable, particularly for video or data-graphics projection.
Grey XH600V is a grey front projection surface that provides excellent contrast and black reproduction, with a low gain to handle today's super-bright projectors. The grey color enhances color contrast, black levels and allows for more ambient light in the audience area. Available in sizes through 9' x 9', or 9' high in greater widths.
Care and Maintenance: Clean surface with a solution of mild dishwashing liquid diluted with warm water. Remove stubborn stains with a solution of rubbing alcohol and water. Do not allow any cleaners to be absorbed by the fabric. Do not use cleaners which contain abrasives or wax.
|
|
|
|
Overview: 253101-AV
- Viewing surface snaps to the back of a 1-1/2" extruded aluminum frame with a black powder coat finish. The frame is visible and serves as a black border around the perimeter of the image area.
- Add optional velvety black textile, Vel-Tex, to eliminate reflections on frame.
- Surface is stretched taut, providing a flat viewing surface with a trim, finished appearance.
- Wall mounting brackets included.
- Overall unit size, including frame, equals image area plus 3" in each dimension.
- Depending on surface, available in sizes through 10' x 10' or 15' NTSC.
- Warranted for one year against defects in materials and workmanship.
- Custom sizes available.
|
**Screen Ordering Notes:- Ships in 7-10 business days.
- Screens are only shipped in Contiguous US (48 states).
- Screen dimensions are based on manufacturers details and subject to change. Tolerances are typically ±1 inch.
|