Now Only $402 Save $104 off our already low pricing!
Selected Screen and Package Details
Projector Screen - VAPEXPRO9135FF
Overview: Visual Apex 135 in. ProFrame Fixed Frame Screen
Visual Apex fixed-frame screens are professional grade materials and use a unique embedded assembling method to keep the fabric completely flat at every point, with a seamless edge design to ensure it will stay dust-free. The frames are made of high quality aluminum tubing, covered with black velvet to absorb the light and enhance the perceived clarity of image. The premium, high-resolution screen fabric with a professional 4 inch border will keep your image clear and vivid, and is UV protected, anti-static cleanable, mildew resistant and flame retardant. Our screens employ a very simple sliding installation method to save you time and money.
Viewable Area:117 x 66 inches
Screen Diagonal:135 inches
Screen Aspect Ratio: 16:9
Additional Product Info:
Overall Dimensions: 125 x 74 in
Screen Surface:Front Elastic CinemaWhite
Front elastic CinemaWhite high gain fabric with 4" professional hand wrapped black velvet border.
4" professional hand wrapped black velvet border!
Unique embedded assembling method to keep the fabric completely flat at every point of the frame, efficient to avoid water wave and V wave.
90mm wide, high-quality aluminum tube, frame covered with black velvet to absorb the light and enhance the perceived clarity of image.
Seamless edge design ensure it stays dust-free.
Very simple sliding installation method, save your time and cost.
Patented clip system, easily attaches fabric to the frame.
Premium high-resolution fabric keep your image as clear and vivid as possible.
High elastic fabric (0.32mmthickness), RoHS standard, excellent physical characteristics of inductibility and elasticity between -15 degrees C to 45 degrees C.
Fabric is UV protected, anti-static cleanable, mildew resistant and flame retardant.
Accessory Package Details
IR Distribution VA-IR1000
Keep your home theater devices behind closed cabinet or closet doors, even when they're in use. The All-in-One IR System makes sure that all of your A/V components receive the commands sent from your existing IR remote controls, even without line-of-sight access. A tiny receiver can be placed near your television or set up in a hole drilled in your equipment cabinet, and this system will deliver your commands to up to eight individual home theater components.
• IR distribution system delivers commands from your existing IR remote to A/V components in a cabinet
• Included IR receiver comes with multiple mounting options
• 2 dual IR emitters deliver commands up to 4 devices
How it Works
Mount the IR receiver on the side of your television using the included double-stick tape or insert it into one of the included holders to place it on a cabinet shelf or desk. Your IR commands will travel from the IR receiver to the hub, which routes the signal to the IR emitters. The emitters repeat the IR signals to your A/V components.
IR Receiver with 1m cord and 4 pin DIN Connector
2 dual output emitters with 2m and 4m cord and mini-plug connector
Remote Control - VA-RA1000B
Easy operation with backlit LED screen
Controls up to 8 AV components
Pre-programmed codes are compatible with most brands
Instructional video for the VAPEX VA-RA1000B Universal Remote:
Miscellaneous - DUST COVER
Visual Apex Home Theater Projector Dust Cover
Your environment can affect the performance and lifespan of your projector. Shield your investment from common household dust and pollutants with a handy dust cover from Visual Apex.
LCD projectors in particular use air filters, much like your own AC system at home, to clean the air brought into the projector through regular use. These air filters need to be checked on a regular basis, cleaned and possibly replaced. This dust cover gives you an extra layer of protection and helps prolong the time between replacing filters. You should still check the filters on a regular basis but having this cover will go a long way toward reducing the cleaning you have to do.
Dust, as we all know, has a way of creeping into things, electronics specifically. Rather than worry about dust affecting the lens or the control buttons or the cable terminals, this dust cover allows you to leave your projector with piece of mind until your next movie night or sports event or gaming championship.
This dust cover is designed to fit the majority of home theater projectors, however due to the size of some models, it is not recommended.
Cable - HDMI-30FTv2.0
HDMI 2.0 is backwards compatible with earlier versions of the HDMI specification, is the most recent update of the HDMI specification. It also enables key enhancements to support market requirements for enhancing the consumer video and audio experience.
Enables transmission of High Dynamic Range (HDR) video
Bandwidth up to 18Gbps
4K @ 50/60 (2160p), which is 4 times the clarity of 1080p/60 video resolution
Up to 32 audio channels for a multi-dimensional immersive audio experience
Up to 1536kHz audio sample frequency for the highest audio fidelity
Simultaneous delivery of dual video streams to multiple users on the same screen
Simultaneous delivery of multi-stream audio to multiple users (Up to 4)
Support for the wide angle theatrical 21:9 video aspect ratio
Dynamic synchronization of video and audio streams
CEC extensions provide more expanded command and control of consumer electronics devices through a single control point
Projector Ceiling Mount - AV819-A
The Visual Apex All-in-One Universal Flush and Extension Projector Ceiling Mount
Hang your projector out of the way to save some space in your living room or home theater. This universal ceiling mount is easy to use, durable and offers a clean look to your setup. This new extremely flexible design allows you to mount your projector Flush to the ceiling and/or drop down to a length that fits your needs, up to 32" from the ceiling. Featuring two poles that allow for extension from flush mount for flexible positioning and multiple size brackets to fit any projector base, up to 30 pounds.
AV819-A Universal Projector Flush Ceiling Mount
The AV819A All-in-one universal projector mount gives you everything you need for a quick, easy installation and hassle free projector maintenance.
Low profile Flush mount option 4.25" from ceiling
Adjustable extension height option 20" - 32" from ceiling
Quick and easy Installation
Extremely flexible design fits all popular projectors
+ / - 20 degrees tilt & roll for projector
360 degree rotation for projector
Cable routing channel for clean look
Quick and easy Installation
One year product warranty
Three different bracket sizes - 6.5" (4), 4.5" (4), 2.5" (4)
10 different size mounting screws for optimal use
5 different size spacers/washers
4 additional bracket screws/spacers
2 sizes allan wrenches
***Due to the many different applications and mounting surfaces, exact mounting hardware for your ceiling installation may not be included. Please be sure to choose the correct pieces for your surface***
Load Capacity: 30 lbs
Flush Mount Height: 4.25" from ceiling
Adjustable Extension Height: 20" to 32"
Tilt and Roll Adjustments: +/-20 degrees
Swivel Rotation: 360 degrees
Flush Mount Dimensions:Length: 6.25"
Weight: 4 lbs
Extension Mount Dimensions:Length: 20" - 32"
Weight: 4 lbs
Box DimensionsLength: 17"
Weight: 9.2 lbs